Pro Series II Builder Kit
45 inches tall! E16-6 and F15-8 engine powered!
ATTENTION: Requires PS II Launch Base (3552) with 1/4? launch rod or Porta-Pad E Launch Pad (2238) and E Launch Controller (2230) or Pro Series II Launch Controller (2240) with 30? of wire.
We continue to develop and grow the Pro Series II line! This time around we?re offering up a BT60 (1.64 in/42 mm) diameter body tube for your building enjoyment. Standing over 45 inches tall, the Star Orbiter comes with the quick release motor retention system just as the other Pro Series kits do. (9750 Pro Series II 29MM Retainer Set ? is also sold separately). Construction of this kit is not difficult and the altitudes you will reach are very impressive! Building and finish work can easily be accomplished over a few days.
WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, epoxy, carpenter?s glue, hobby knife, masking tape, clear tape, primer (white), paint (black, orange) and clear coat (optional). (Tools, construction and finishing supplies not included.)
WHAT YOU NEED TO LAUNCH (sold separately): Pro Series II Launch Base and Pro Series II Launch Controller, Estes model rocket engines, starters and Pro Series II Recovery Wadding. Six C 1.5V high quality alkaline batteries are also required for launch controller (not included).
E16-6, F15-8 w/ Engine Adapter (sold separately)- D12-3, E12-4
Projected Max Altitude
1800 ft. (549 m)
18 in. (45.7 cm) Parachute
45.2 in. (114.8 cm)
1.64 in. (42 mm)
5.9 oz. (167.3 g)
Estimated Assembly Time
2 Hours (painting and glue drying time not included)
Screw on Motor Retainer
Laser cut wood
Pro Series II Launch Pad and Pro Series II Launch Controller
Launch Rod Size
Estes Pro Series II rocket kits are recommended for boys and girls ages 18+ with adult supervision for those under 18, and rocketeers of all ages.